Haben sie von NCARB Project-Planning-Design Dumps von Zertpruefung gehört? Aber, Haben Sie diese Dumps benutzt? Viele Leute haben gesagt, dass Zertpruefung Dumps sehr gute Unterlagen sind, womit sie die NCARB Project-Planning-Design Zertifizierungsprüfung bestanden haben. Wir Zertpruefung sind von vielen Leuten, die früher die NCARB Project-Planning-Design Dumps benutzt haben, gut bewertet, weil sie wirklich viel Zeit für die NCARB Project-Planning-Design Prüfungen sparen und den Erfolg für die Teilnehmer garantieren.
Wissen Sie NCARB Project-Planning-Design Dumps von Zertpruefung? Warum sind diese Dumps von den Benutzern gut bewertet? Wollen Sie diese Dumps probieren? Klicken Sie bitte Zertpruefung Website und die Demo herunterladen. Und jedr Fragenkatalog hat eine kostlose Demo. Wenn Sie es gut finden, können Sie diese Dumps sofort kaufen. Nach dem Kauf können Sie auch einen einjährigen kostlosen Aktualisierungsservice bekommen. Innerhalb eines Jahres können Sie die neuesten NCARB Project-Planning-Design Prüfungsunterlagen besitzen. Damit können Sie NCARB Project-Planning-Design Zertifizierungsprüfung sehr leicht bestehen und dieses Zertifikat bekommen.
>> Project-Planning-Design Fragenpool <<
Möchten Sie in kurzer Zeit die Project-Planning-Design NCARB Zertifizierungsprüfung bestehen? Unser Zertpruefung bietet Ihnen die Testfragen und Antworten zur NCARB Project-Planning-Design Zertifizierung, die von den IT-Experten durch Experimente und Praxis erhalten werden und über IT-Zertifizierungserfahrungen über 10 Jahre verfügt. Außerdem gewährt unser Zertpruefung Ihnen die vollständigsten Zertifizierungskriterien sowie Ausbildungsmethoden. Die Ergebnisse von unseren Kunden haben bewiesen, dass die Genauigkeit der NCARB Project-Planning-Design Zertifizierung 100% beträgt! Wenn Sie irgendeine Frage über die Project-Planning-Design Prüfung haben, werden wir so schnell wie möglich beantworten.
| Thema | Einzelheiten |
|---|---|
| Thema 1 |
|
| Thema 2 |
|
| Thema 3 |
|
| Thema 4 |
|
| Thema 5 |
|
67. Frage
A proposed six-story commercial building will have a basement level with finished floor 20'-0" below grade.
The building site is located less than 1 mile from the coastline. A site survey indicates that the average site elevation is 5'-0" above sea level.
Based on the site-specific conditions, which four issues should the architect address in the design? Check the four that apply.
Antwort: A,C,D,F
Begründung:
Comprehensive and Detailed Explanation:
Dewatering during construction (A): The deep excavation (20' below grade) near sea level likely intersects the water table, necessitating dewatering to keep the site dry during construction.
Water table height (B): Proximity to the coast raises the water table, which affects foundation and waterproofing design.
Potential corrosion due to salt (D): Salt in water vapor and marine air can corrode metal exterior finishes and reinforcements; materials and coatings must be selected accordingly.
Hydrostatic pressure on basement walls (E): High water tables create significant lateral water pressure requiring robust waterproofing and structural resistance.
Spread footings (C) may or may not be suitable depending on soil but are not specific to coastal or basement conditions.
Radiant flooring (F) is unrelated to site conditions and more a mechanical choice.
References:
ARE 5.0 PPD - Environmental Conditions and Context, Site and Foundation Design The Architect's Handbook of Professional Practice, 15th Edition - Coastal and Marine Environment Design
68. Frage
An architect has just received client approval of the Schematic Design documents for a three-story, outpatient medical clinic. The clinic is located within a mixed-use development governed by a City-approved Planned Development (PD) document. The medical clinic design utilizes standardized departmental layouts and includes outpatient clinics, as well as treatment spaces, administrative spaces and public/lobby spaces.
The site needs to accommodate four different vehicular traffic flows: patient traffic, staff traffic, service and delivery traffic, and emergency services traffic. In addition, a pedestrian plaza must connect to the mixed-use development sidewalks. The plaza must provide space for bicycle parking and will serve as the future bus stop.
The site design addresses several challenges related to building orientation. The southeast facade, with excellent visibility from the highway, is the location of all service equipment. The building entrance faces northwest, convenient to the parking but not visible from the highway.
The client believes future patient volumes will outgrow the clinic. The PD document allows for a planned Phase 2 development on the adjacent vacant site to the southwest. Phase 2 would include a second building (2 story, 80,000 BGSF) and/or a parking deck.
Other considerations for the project include:
* Protected tree requirements are defined in the PD document.
* Easy pedestrian access must be provided from Sycamore Boulevard.
* All required parking for the clinic must be accommodated on site.
* Programmed area includes 109,450 Departmental Gross Square Feet (DGSF) / 130,184 Building Gross Square Feet (BGSF).
* Exterior material percentages are dictated by the PD document and shall not exceed specific percentages for Primary and Secondary Finishes.
* All service equipment needs to be screened; see PD document for restrictions.
* Signage opportunities are important to the client.
* Acoustical privacy is a concern of the healthcare system.
The following resources are available for your reference:
* Drawings, including a perspective, plans, and exterior elevations
* Building Program, including client's departmental program and detailed program for Treatment 01 (Infusion)
* Exterior Material Cost Comparisons
* Planned Development Document
* IBC Excerpts, showing relevant code sections
* ADA Excerpts, showing relevant sections from the ADA Standards for Accessible Design The developer decides that the 4-inch terra cotta exterior veneer is too expensive, and wants to replace the terra cotta with an alternative finish in its entirety.
Which of the following alternative materials should the architect suggest to reduce cost and meet the Planned Development Document requirements? Check the two that apply.
Antwort: B,F
Begründung:
To reduce costs while complying with Planned Development (PD) document restrictions on exterior finishes, the architect should select materials that are less expensive than terra cotta yet meet aesthetic and code requirements:
Standard brick (C) is a cost-effective, durable alternative with broad acceptance.
Earth tone EIFS (E) (Exterior Insulation and Finish System) offers an economical and versatile finish that can replicate various textures and colors while reducing costs.
Low priced stone (A) and cultured stone (B) may still be costly or not permitted per PD document.
Artisan brick (D) and metal panels (F) may exceed allowed percentages or not fit aesthetic guidelines.
References:
Planned Development Document
ARE 5.0 PPD - Project Integration of Program and Systems
The Architect's Handbook of Professional Practice, 15th Edition - Exterior Finishes
69. Frage
To reduce embodied energy in a 500-unit redevelopment, the architect should create a strategy to include which of the following? Check the three that apply.
Antwort: D,E,F
Begründung:
Comprehensive and Detailed Explanation From Exact Extract:
Reducing embodied energy involves strategies that minimize new material production and transportation impacts:
Re-using existing buildings (A) avoids new material consumption and demolition waste.
Using local and low-energy materials (C) reduces transportation energy and energy-intensive materials.
Simple geometric structures (F) use fewer materials and minimize complexity, lowering embodied energy.
Orientation and transitional spaces (B) mainly affect operational energy, not embodied energy.
Altering the proportion of high-rise or single-story units (D, E) affects land use and operational efficiency more than embodied energy.
NCARB emphasizes these strategies in sustainable design practices.
References:
ARE 5.0 PPD - Environmental Conditions and Context, Sustainable Design
The Architect's Handbook of Professional Practice, 15th Edition - Sustainable Building Materials
________________________________________
70. Frage
An architect is working with a developer to determine which of three available sites should be the preferred location for a new office building that will primarily utilize passive energy systems. All three sites are located in a cold, northern climate with winter winds predominantly from the north and west.
Site descriptions:
Site A: Located at the top of a hill; small vegetation and brush; expansive views in all directions.
Site B: Located along a river; heavily wooded area on the north side; coniferous trees shading the southern face of the building.
Site C: Located on a rocky, south-facing slope; wooded on the eastern edge; native grasses on southern boundary.
Primary goal: maximize solar energy potential while maintaining winter wind protection.
Which site should be selected?
Antwort: C
Begründung:
Comprehensive and Detailed Explanation From Exact Extract:
Site C offers a south-facing slope, which maximizes solar exposure-crucial in cold climates for passive solar heating. The wooded eastern edge provides wind protection from cold morning winds, and native grasses on the south reduce erosion while minimally shading.
Site A, on a hilltop with sparse vegetation, lacks wind protection.
Site B has coniferous trees shading the southern face, reducing solar gain, which is counterproductive for passive solar design.
Thus, Site C optimizes both solar potential and wind protection.
References:
ARE 5.0 PPD - Environmental Conditions and Context, Passive Solar Design The Architect's Handbook of Professional Practice, 15th Edition - Sustainable Site Planning
71. Frage
During design development of a new college laboratory facility, the owner asks the architect to include way- finding signage mounted adjacent to doors. The type of signage requested will project into the corridors of the building.
Which of the following should the architect consider when selecting the signage? Check the three that apply.
Antwort: A,D,F
Begründung:
Comprehensive and Detailed Explanation From Exact Extract:
When signage projects into corridors:
ADA requirements (A) ensure signage is accessible to all, including those with disabilities.
IBC exit width requirements (B) ensure projected signage does not reduce required egress widths.
Manufacturer installation information (F) guides proper, safe mounting and compliance with structural requirements.
Zoning (D) is generally for exterior signage.
Energy code (E) is not related.
Material and finish (C) affect aesthetics but not code compliance.
References:
ARE 5.0 PPD - Codes and Regulations, Accessibility
The Architect's Handbook of Professional Practice, 15th Edition - Signage Design
72. Frage
......
Trotzdem sagen viele Menschen, dass das Ergebniss nicht wichtig und der Prozess am allerwichtigsten ist. Aber diese Darstellung passt nicht in der NCARB Project-Planning-Design Prüfung, denn die Zertifizierung der NCARB Project-Planning-Design können Ihnen im Arbeitsleben in der IT-Branche echte Vorteile mitbringen. Wenn Sie Entschluss haben, die Prüfung zu bestehen, dann sollten Sie unsere NCARB Project-Planning-Design Prüfungssoftware benutzen wegen ihrer anspruchsvollen Garantie. Wenn Sie noch zögern, können Sie zuerst unsere kostenlose Demo der NCARB Project-Planning-Design probieren. Dadurch werden Sie empfinden die Konfidenz fürs Bestehen, die wir Zertpruefung Ihnen mitbringen!
Project-Planning-Design Zertifikatsfragen: https://www.zertpruefung.de/Project-Planning-Design_exam.html
+88 457 845 695
example#yourmail.com
California, USA
© 2023 Edusion. All Rights Reserved
